CREASE & LUMP DETECTION TECHNOLOGY

SPECIFICATIONS
 

Defects Types Detected:

Creases
Lumps
Splices
Wrinkles
Other Elevation Defects

Minimum Detectable Defect:

 0.001" (0.025 mm)

Sensitivity:

 Continuously Adjustable

Sensitivity Range:

 100 to 1

Web Material Texture:

 Smooth

Inspection Increments:

 6" (15.24 cm) per Head Unit
Each Containing 2 Roller Type Light
Gates 3" (7.62 mm) Long

Maximum Inspection Width:

 Unlimited Through
Side By Side Installation of
6" Head Units

Contact Head Pressure:

 2 ounces/linear inch
(2 grams/linear millimeter)

Maximum Web Speed:

 1,000'/min. (304.8 m/min.)

Outputs:
    Standard:
   
    Optional:

Audio/Visual Alarm
9-12 VDC Pulse
Reject Control Output
Edge Marker Output
Counters
Microcontroller Based Display

Mounting:

 Per Existing Equipment Requirements

Illumination:

 Fluorescent Light Sources

Ambient Temperature:

 40 to 160° F (4 to 70° C)

Power:

120/220/240 VAC
50/60 Hz
Single Phase

Specifications are subject to change without notice.